(pack) Wiper K07 ID 12mm-180mm PU/NBR (choose dimensions)

Description

Welcome to our oil seal store. Huge amount of different dimensions and materials are on stock!! Don´t hasitate to contact us. We also have o-ring store, bearing store,chain store,
hydraulic and pneumatic seals store, belt store, etc - we can send together.
Most of oil seals are on stock, so we are usually shipping within 2 bussiness days.
Longer handling time 10-20 days occures just on sold out items.
We can also use UPS express shipping. Shipping rates are: UPS to USA
30USD,
UPS to Europe, U.K, Germany, France
20USD,
UPS to N.a S.America, Canada, Mexico, Brazil, Asia, China, Japan, Australia
50USD
K07 is a single acting wiper ensuring that foreign particles are not introduced into the hydraulic systems , avoiding wear and damage to all the internal components including seals
PRODUCT ADVANTAGES
• Superior wiping performance
• Axially open , easy-construction groove
• Used in heavy conditions by the good mechanical properties of PU material.
• Secure seating , press fitting into the housing
• Space-saving construction
APPLICATION
Light and medium duty construction machinery , fork-lift trucks , agricultural machinery , support cylinders and standard cylinders.
MATERIAL
CODE
NBR
90 SHORE A
NB
9001
STEEL
ST
37
FE
9901
OPERATING CONDITIONS
MEDIA
Mineral oils(DIN 51524)
HFA and HFB
HFC
TEMPERATURE
-30°C +105°C
+5°C +60°C
-30°C +60°C
SPEED
≤1.0 m/sn
≤1.0 m/sn
≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.
SURFACE ROUGHNESS
Ra
Rmax
Sliding Surface Ød
≤0.4 μm
≤3.2 μm
Groove Base ØD
≤1.6 μm
≤10 μm
Groove Flanks S
1
≤3.2 μm
≤16 μm
INSTALLATION
Wiper is pressed into axially open housings. Special equipment should be used during this process. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
NOTES
K07 wipers are single acting and can be used with combination of all rod sealing elements. K07 wipers can be produced on requests in FKM material for special applications that require high temperatures.
MATERIAL
CODE
PU
92 SHORE A
PU
9201
STEEL
ST
37
FE
9901
OPERATING CONDITIONS
MEDIA
Mineral oils (DIN 51524)
HFA and HFB
HFC
TEMPERATURE
-30°C +100°C
+5°C +50°C
-30°C +40°C
SPEED
≤1.0 m/sn
≤1.0 m/sn
≤1.0 m/sn
Note: The above data are maximum values and cannot be used at the same time.