-40%

(pack) Wiper K05 PU ID16mm-200mm (=PU5) (choose dimensions)

$ 0.66

Availability: 20400 in stock
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Brand: Unbranded/Generic
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Condition: New
  • All returns accepted: Returns Accepted

    Description

    Welcome to our oil seal store. Huge amount of different dimensions and materials are on stock!! Don´t hasitate to contact us. We also have o-ring store, bearing store,chain store,
    hydraulic and pneumatic seals store, belt store, etc - we can send together.
    Most of oil seals are on stock, so we are usually shipping within 2 bussiness days.
    Longer handling time 10-20 days occures just on sold out items.
    We can also use UPS express shipping. Shipping rates are: UPS to USA
    30USD,
    UPS to Europe, U.K, Germany, France
    20USD,
    UPS to N.a S.America, Canada, Mexico, Brazil, Asia, China, Japan, Australia
    50USD
    K05 is a single acting wiper ensuring that foreign particles are notintroduced into the hydraulic systems , avoiding wear and damageto all the internal components including seals.
    PRODUCT ADVANTAGES
    • Superior wiping performance
    • Improved wiping effect of dirt , water spray , etc with the helpof the secondary sealing lip on the outer diameter
    • Simple , easy-construction groove
    • Wide range of dimensions
    • No twisting in the housing
    • Used in heavy conditions by the good tear and ruptureproperties of PU material.
    • Easy installation
    • Specially design to prevent big particles to go into the system
    APPLICATION
    Used especially in earth moving equipment , agriculturalmachinery , telescopic cylinders , cranes , mining equipment andloading platforms.
    MATERIAL
    CODE
    PU
    95 SHORE A
    PU9501
    OPERATING CONDITIONS
    MEDIA
    Mineral oils (DIN 51524)
    HFA and HFB
    HFC
    TEMPERATURE
    -30°C +100°C
    +5°C +50°C
    -30°C +40°C
    SPEED
    ≤ 1.0 m/sn
    ≤1.0 m/sn
    ≤1.0 m/sn
    Note: The above data are maximum values and cannot be used at the same time.
    SURFACE ROUGHNESS
    Ra
    Rmax
    Sliding Surface Ød
    ≤0.4 μm
    ≤3.2 μm
    Groove Base ØD
    ≤1.6 μm
    ≤10 μm
    Groove Flanks S1
    ≤3.2 μm
    ≤16 μm
    INSTALLATION
    Generally , wiper can be easily fitted into the closed housing by deforming into a kidney shape. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
    NOTES
    K05 wipers are single acting and can be used with combination of all rod sealing elements.