TUBING, BRAIDED PVC CLEAR 1-1/2" ID x 1.94" OD x 50ft, FDA APPROVED <410.150x50

Description

MAINLAND VALVE & FITTING, INC.
INDUSTRIAL WHOLESALE SUPPLY
MAINLAND VALVE & FITTING IS A SURPLUS INDUSTRIAL WHOLESALE SUPPLY COMPANY. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS, YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS.
Be sure to add me to your
favorites list
!
Lot Description:
BRAIDED
PVC FDA TUBING
ID: 1-1/2"
OD: 1.94"
Length: 50 feet
Reinforcement: 2 Spiral Plies & 1 Longitudinal Ply
Temperature Range: -25 ~ +150 deg F
Tube: Clear Blue Tint PVC w/Yellow Stripe
FDA Approved
Max Length: 50' per sections
This is an excellent hose for conveying liquids, air and powdered foods. The hose is transparent, allowing for easy inspection during service.
MVF, Inc Braided Clear (Blue Tint) PVC Tubing Pressures & Measurements
Inner Diameter
Outer Diameter
Max Working Pressure @70°F
Bursting Pressure @70°F
1/4"
0.44”
250 psi
750 psi
3/8"
0.59"
225 psi
675 psi
1/2"
0.75"
200 psi
600 psi
5/8"
0.89”
200 psi
600 psi
3/4"
1.03"
150 psi
450 psi
1"
1.30"
125 psi
375 psi
1-1/4"
1.62"
100 psi
300 psi
1-1/2"
1.94”
2"
2.49”
75 psi
225 psi
Working pressures ratings are based on ambient temperatures of 70 deg F and will vary inversely with temperature change.
At 120 deg F the working pressure will be reduced 40% of the working pressure at 70 deg F.
Recommended procedure to maintain serviceability of PVC hose when not in use:
Disconnect and drain
Keep hose straight and flat
Avoid extreme heat and cold
Store out of direct sun light
(
These products are represented as FACTORY NEW)
GREAT FOR HOME BREWING
IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US.
Be sure to add me to your
favorites list
!
Bid High
&
Bid
Often
THANK YOU, COME AGAIN
Please note:
In some cases we will use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F, 8-5cst. We will respond to any questions you have on the following business day.
INVESTMENT RECOVERY
*SURPLUS INDUSTRIAL WHOLESALE SUPPLY*
Terms & Conditions:
Mainland Valve & Fitting, Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve & Fitting, Inc. that is noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied.  All products represented by Mainland Valve & Fitting, Inc. that is noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied.  All Names, Logos, Description & other related information are trademarks of their respected companies.
All information listed herein is, to the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. Please review the pictures carefully. All material noted as
new surplus
are unused and in as new condition, all material noted as
used
are used and in a usable or repairable condition. If you have any questions, contact us.
Shipping cost will be actual cost only plus a small handling fee to help cover cost associated with shipping (.00 min. unless special request are made). We will combine multiple auctions into one shipment; you pay only one handling fee per shipment, even on combined shipments. Questions, comments, or concerns please contact us.
Please check out our about me page which includes our full terms and conditions and full warranty information.