TechLogix Networx TL-TP70-HDIR 70m HDMI & IR over Twisted Pair Cable Extender

Description

The TechLogix Networx TL-TP70-HDIR HDMI Extender replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.
In actual practice, this means you can use the TL-TP70-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely...all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display.
TechLogix Networx TL-TP70-HDIR Features:
Transmit HDMI & IR over a single twisted pair cable
Extend 1080p HD up to 230 ft. (70m.)
Extend 4K@30 HD up to 130 ft. (40m.)
Embedded bi-directional IR control
System powered from either the transmitter or receiver
Audio Return Channel (ARC)
TechLogix Networx TL-TP70-HDIR Specifications:
I/O Connections:
HDMI: 1 HDMI type A connector
HDBT: 1 RJ45 connector
IR in: 1 3.5mm stereo jack
IR out: 1 3.5mm mono jack
ARC audio: 1 coaxial RCA connector in transmitter
Power: 1 DC 12V connector with locking screw
Supported Audio and Video:
Maximum Video Compatibility:
70 m: Deep Color 36/30/24 Bit at 1080p
40 m: Deep Color 48 Bit at 1080p, 3D, 4k x 2k (UHD) 30 Hz: RGB,
YCbCr 4:4:4, YCbCr 4:2:2, 60 Hz: YCbCr 4:2:0
Video Compliance: HDMI 1.4, HDCP 2.2
ARC audio: PCM on HDMI (input) or Coax digital output
IR Carrier Frequency Range: 33-55kHz at 5 volts
Input Video Signal: 0.5-1.0 Vpp
HDBaseT Signal Characteristics:
Maximum Distance: 70m
Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth: 10.2 Gbps