8ft REX Windmill Tail Vane Logo Layout for Stencil

Description

If we had for every time we were ask if we had windmill tail vane stencils, we wouldn't need to sell these. See our additional stencil layout listings as we now offer those for various sizes & models of Aermotor, Baker Monitor, Dempster, Challenge, Flint & Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover & Woodmanse manufactured windmills. Many others are in production.
Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36"  or 36" X 24" paper, shipped rolled in a protective tube via
Fed Ex SmartPost
. Printing is black & white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo.
Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding.
If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at 9.99.
Having used our layouts several times for projects at our windmill park we offer these helpful tips for use.
1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters.
2.Use a sharp Exacto knife to cut out your letters.
3. We recommend using a large sheet of cardboard under the layout once you begin to cut out letters. This will protect your table from being cut and provides a good work surface that you can tape your layout to so it does not move ore roll up on you.
4. Once you have letters cut out you can trim your stencil layout to segments more easily positioned on your tail vane.
5. If your stencil layout wants to roll up, or if you plan to wait a day or two to trace it to your vane, we suggest you keep it flattened out with cardboard and a few books for weight as moisture in the air will make it roll at the freshly cut letter edges.
6. Position your stencil layout segments on your vane with masking tape.
7. Use a Sharpie Ultra Fine Point marker to trace the outlines of your stencil layout to your vane. Remove your stencil layout from your vane before you begin to fill in the letters with paint.
8. Use a water base enamel paint (we prefer satin finish) available at Walmart, Lowes or Home Depot along with small face craft & hobby paint brushes.
This listing is for a 8ft Rex Windmill vane stencil layout. This can be used for your restoration. It includes 2- 48" X 36" sheets as shown.
Message us with your questions about this item. If we don't have the one you need listed, send us a note and we'll let you know if we can create a listing for the stencil layout you desire.
Guarantee
All items are guaranteed to be received in the condition as described, including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us.
We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue.
Feedback
We leave feedback when the transaction is complete. By complete, we mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.